• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Hydro Turf for 2007 Sea Doo Islandia

gwagsmj13

Member
Messages
2
Reaction score
1
Points
10
Boat Make
SeaDoo
Year
2007
Boat Model
Islandia
Boat Length
22
I recently ordered Hydro Turf for my 2007 Sea Doo Islandia. I haven't used the carpeting it originally came with in several years. One question I had for anyone with experience installing it, especially in an Islandia. The Islandia has carpet snaps throughout the boat on the floor that can be easily removed by unscrewing them and pulling them out. There is a small hole left where it is removed. I assume it is ok to have those holes there and the Hydro Turf go over them, rather than install it with the snaps left underneath. Just wanted to see if someone could confirm for me. Thank you!
 
Fill the hole with 5200 (unless you want to do real gelcoat, but most just do 5200 or caulk). You don't want an open hole in the fiberglass, as water can get to the fibers and migrate along, doing damage to any structural wood you might have down there.
 
Last edited:
Back
Top