Another Clean-Out Plug Thread

[TeenGee]

If you installed a #350 o-ring read post #109.
Sounds like your o-ring is installed where mine are.
I had a little difficulty turning the handle on one of my plugs. I put a long wrench down onto the handle and used a screwdriver to turn the wrench. I have subsequently added super lube to the top go the locking lugs and between the metal plate and the plastic plug to reduce friction. I haven't had any problems since.

 

[anmut]

If you installed a #350 o-ring read post #109.
Sounds like your o-ring is installed where mine are.
I had a little difficulty turning the handle on one of my plugs. I put a long wrench down onto the handle and used a screwdriver to turn the wrench. I have subsequently added super lube to the top go the locking lugs and between the metal plate and the plastic plug to reduce friction. I haven't had any problems since.

How much did it help with water intrusion?

 

[TeenGee]

Go back to post #90.
Ports were dry.

 

[anmut]

I see that now - heck, I even replied to it. I must be losing my mind in my old age here...